The screen filter is a relatively simple filtering device with a relatively low cost. However, it is mostly used in irrigation systems, and the filtering medium is a stainless steel mesh. It is mainly used to filter impurities such as powder, sand and scale in irrigation water, and is also used in irrigation methods containing a small amount of dirt. So, let's take a look at the uses of centrifugal screen filters together!

The application of centrifugal filter products

Centrifugal filters are mainly used for the primary filtration of water containing sand and can separate sand and stones from the water. This filter is installed beside Wells and pumping stations, and is suitable for separating a large amount of sand and gravel contained in water. Under the requirement of meeting the filtration conditions, the sand separation effect is: 98-92 grains of sand and gravel from the 60th to 150th. It is generally not used alone but only as a front-end filter in a filtration system.

Filtration principle: The filter works based on the principles of gravity and centrifugal force to remove solid particles heavier than water. Water enters the centrifugal body through the inlet pipe. Through rotation, it generates centrifugal force, which moves the sand and other high-density solid particles to the pipe wall, forming a vortex. The sand and stones are then placed in the sand collection box, and the clear water flows into the outlet with the flow, completing the separation of water and sand. Regular sand discharge should be carried out, and the time of sand discharge must be determined according to the water quality conditions.

Precautions for the use of centrifugal filters: 1. At the moment when the pump is running or the centrifugal filter is stopped, due to the stable water flow, it will affect the filtration effect. Therefore, it is often used in combination with a screen filter for better results. 2. Install a through pipe with the same diameter as the water supply port before the water supply port of the filter to ensure smooth flow at the water supply port. The length of the pipe should be 10 to 15 times the diameter of the water supply port.

The uses of network filters

Filter screens are suitable for irrigation of various crops such as vegetables, fruit trees, greenhouses, flowers, tea gardens, green Spaces and fields. They are essential irrigation products for water conservation, energy saving, improving plant quality, enhancing product grades, maintaining ecological balance and benefiting the country and the people, as well as for the transformation from traditional agriculture to modern agriculture. When installing and using the network filter, please read the product's user manual carefully and use this product correctly to avoid losses and troubles caused by incorrect installation and use.

Maintenance instructions for centrifugal filters

1. Check the condition of the pressure gauge to see if it can work normally.

2. Observe the pressure values of pressure gauge 1 and Pressure gauge 2. When the difference between the pressure values of the two pressure gauges exceeds 0.02GP, clean the filter.

The characteristics and application effects of centrifugal filters

As China gradually promotes the great development of modernization, the amount of high-tech agricultural farmland is increasing day by day, and there is an urgent need to provide high-tech equipment companies that meet the growing product requirements. In developing countries, agricultural irrigation filtration equipment still dominates the market. Our company, in response to market trends, produces equipment with high technological content, high working efficiency, good quality and reliable customer support. Centrifugal screen filters have become green and sustainable filtration equipment in the industry and are widely circulated.

The above is an introduction to the uses of centrifugal screen filters. If you need to know more, please feel free to contact us at any time!