The disc filter is widely used in various industrial and commercial fields such as food, textile, metallurgy, plastic, medicine, building materials, papermaking, HVAC systems of industrial and commercial buildings, irrigation, wastewater treatment, sewage recycling, municipal water supply, waterworks, large power plants, chemical enterprises, and emergency filtration. The filtration grade is determined based on the water quality requirements of the subsequent water system or equipment. And determine the water quality requirements of the water usage occasions.

Laminated filter Characteristics

Precise filtration

According to the water usage requirements, Different precision filter discs can be selected. The specifications include 20 microns, 55 microns, 100 microns, 130 microns, 200 microns, 400 microns and many others. The filtration rate is greater than 85%.

Effective backwashing.

Due to the fact that the filter pores are fully open during backwashing and centrifugal spraying, It has achieved a cleaning effect that other filters cannot reach. The backwashing process for each filter unit can be completed in just 10 to 20 seconds.

Fully automatic operation and continuous drainage.

And the backwashing start-up is controlled by time and pressure difference. In the filtration system, Each filter unit and workstation is backwashed in sequence. The automatic switching between working and backwashing states can ensure continuous drainage, reduce system pressure loss, and prevent the deterioration of filtration and backwashing effects due to usage time.

Modular design

Users can choose the number of parallel filter units as needed, which are flexibly interchangeable. Make flexible use of the corner space on site and install it in a small area according to local conditions.

Simple to maintain.

There is almost no daily maintenance, no dedicated inspection tools, and very few detachable parts.

Laminated filter Installation precautions.

1. The equipment should be installed on the bypass, so that the equipment can be repaired and maintained without interruption.
2. The equipment can be installed horizontally or vertically according to the on-site conditions. The equipment needs to be connected to the pipeline in the direction of water inlet and outlet.." When installed vertically, the water inlet of the equipment should face upwards; when installed horizontally, the sewage outlet should face downwards.

3. Valves should be installed at the water inlet, water outlet and sewage outlet of the equipment (the sewage valve should be a quick valve).