A fertilizer applicator refers to a fertilizer applicator that conveys liquid or water-based fertilizers. It does not include solid particle fertilizer applicators, and thus is called a liquid fertilizer applicator. The function of the fertilizer applicator is to apply an appropriate amount of top fertilizer according to the different growth stages of crops to meet their growth needs. So the first thing we need to understand clearly when using it is the working principle of the fertilizer applicator. Now, let's take a look together.

Generally speaking, there are two types of fertilizer applicators: absorption fertilization and injection fertilization. Nutrient absorption involves using a special device to create negative pressure at a certain point in the irrigation pipeline, which absorbs the nutrient solution in the pipeline, mixes it with the irrigation water, and then delivers it to the root zone of the crops. Fertilizer injection is a process where the fertilizer solution is injected into the pressure pipe by external force, mixed with the irrigation water, and reaches the root zone of the crops. These two methods each have their own characteristics, and the choice mainly depends on the actual planting situation. Our company adheres to using high-quality materials to produce superior products, takes it as our responsibility to be responsible for our customers, prioritizes them, and strives to create a win-win situation for all. The concentration technology of the fertilizer applicator is a widely applied advanced technology. It is closely related to the concentration of fertilization, irrigation water pressure and system ratio. Only through practical operation can one fully understand the important technical links of fertilization and achieve effective fertilization.

When the flow is blocked through the flow reduction section, the water flow or the flow velocity of the water flow increases, and the flow velocity is opposite to that of the flow passage section. According to Bernoulli's Law, an increase in flow is accompanied by a decrease in water pressure, which is a common Venturi phenomenon. In layman's terms, this effect is that a low pressure is generated around high-speed flowing water, causing advection. The fertilizer solution is forced into the pipe under atmospheric pressure. Proportional pumps are driven by the flow of pressurized water, with small water pressure loss and no need for other power equipment. Directly inhale the liquid additive and dissolve it in the water flow. All the products of our company can also meet these advantages. And in this aspect, everything has been done very well. The fertilizer applicator device moves up and down inside the cylinder. When water is pressurized externally, the fertilizer applicator device evenly absorbs the additives in the lower container into the water flow through the channel. Repeat the up and down movement to achieve the effect of increasing the uniformity and continuity of the water flow.

At present, with the wide application of fertilizer applicators in daily life and their increasingly advanced production technology, we believe that more and more manufacturers will join in. Therefore, we need to take a closer look and make more comparisons. Over the years, the company has been committed to the expansion and development of domestic and international markets, adopting both online e-commerce platforms and offline physical sales methods simultaneously. Nowadays, they have made their products available in all provinces, municipalities and autonomous regions across the country. Their products not only sell well in the domestic market, but also have contact information on their official website. There are also professional staff available online to receive you. If you have any questions, just ask them.